| PART |
Description |
Maker |
| BL-R5421D BL-R5421G BL-R4121F BL-R4131 BL-R4131B-T |
Bright red, standard LED lamp (rectangular type)
Orange, standard LED lamp (rectangular type)
Green, standard LED lamp (rectangular type)
Hi-eff red, standard LED lamp (rectangular type)
Pure green, standard LED lamp (rectangular type)
Yellow, standard LED lamp (rectangular type)
|
Yellow Stone Corp
|
| BL-R5432T BL-R4122Z BL-R4132R BL-R4132W BL-R4133 B |
Bright red, standard LED lamp (rectangular type)
Orange, standard LED lamp (rectangular type)
Green, standard LED lamp (rectangular type)
Pure green, standard LED lamp (rectangular type)
Hi-eff green, standard LED lamp (rectangular type)
Yellow, standard LED lamp (rectangular type)
Hi-eff red, standard LED lamp (rectangular type)
|
Yellow Stone Corp
|
| 1473005-1 1473005-4 1473005-5 |
DDR1&DDR2 SODIMM SOCKET 0.6MM PITCH 200POS STANDARD PROFILE STANDARD TYPE
|
Tyco Electronics
|
| RS45112A400G RS4511119A04 RS45111A900F RS45111ABA0 |
Standard Type（Super SlideTM)
Standard Type锛?uper SlideTM)
Standard Type拢篓Super SlideTM)
|
ALPS ELECTRIC CO.,LTD.
|
| RLS4148 RLS4150 RLS4448 |
Diodes > JEDEC Standard & Euro Standard Diodes > Surface mounting type
Switching diode
|
ROHM[Rohm]
|
| SLR-342YC |
φ3.1(T-1) Circular Type Standard Type <Viewing Angle 2θ1/2 : 40°>
|
Rohm
|
| GSB311111HR GSB311131HR |
USB 3.0 Type A. Right Angle, Receptacle, Through Hole, Standard Type
|
Amphenol Corporation
|
| SETM SETK SETA SETB SETD SETE SETG SETJ |
Compliant to DIN standard, Compliant to IEC603-2/DIN41612 standard; HRS No: 583-0071-7 72; No. of Positions: 96; Connector Type: Wire; Contact Gender
SURFACE MOUNT HIGH EFFICIENT RECTIFIERS
|
Electronics Industry Public Company Limited
EIC[EIC discrete Semiconductors]
|
| R1112N R1112N4.3BTR R1112N4.0BTR R1112N1.6ATL R111 |
Low noise 150mA LDO regulator. Output voltage 3.0V. Active high type. Standard taping type TR
Low noise 150mA LDO regulator. Output voltage 3.0V. Active high type. Taping type TL
Low noise 150mA LDO regulator. Output voltage 3.0V. Active low type. Standard taping type TR
Low noise 150mA LDO regulator. Output voltage 3.0V. Active low type. Taping type TL
LOW NOISE 150mA LDO REGULATOR 5 V FIXED POSITIVE LDO REGULATOR, 0.26 V DROPOUT, PDSO5
Analog IC 模拟IC
Test fixture for 0402 - 1812 body sizes
Linear Sensor Photodiode Array; 102x1 Sensor-Elements Organization; 300 Dots-Per-Inch (DPI) Sensor Pitch; On-Chip 8-bit Analog-to-Digital Conversion; Three-Zone Prgrammable Offset (Dark Level) and Gain; High Sped Serial Interface; 1MHz Pixel Rate
High reliability part. For price, availability and ordering contact Coilcraft Critical Products, cp@coilcraft.com
|
HIROSE ELECTRIC Co., Ltd.
Ricoh Co., Ltd.
RICOH electronics devic...
|
| MT9671 |
Standard Type
|
DB Lectro Inc
|
| R-B101N1 |
6W Standard Type
|
Rohm
|
